E 'can be used for car engine oil if the oil is of good quality. E 'indifferent use in the engine of a car or a motorcycle, especially if the change of motion is not lubricated by the oil of the engine (which is quite rare, however, at least in the most recent motion).
If the engine oil is also used to lubricate the gearbox and clutch (on some bikes do not) you should not use oils on the label that says "energy conserving" because you could have the clutch slip. The oils are energy conserving - in line indicators - those used for coupons every 30,000 km or those with hot viscosity "30" es.: 5W30. The Mobil1 does not include this indication (that would be suitable).
Who says that in motion the wheels of change "blending" and "destroy" the oil is not suitable in a very short time, it is noted that even in the gasoline engine oil pump performs the same operations.
However there are still some aspects that could be considered against the use of engine oil in car engines in motorcycles.
The engine of the bike comes to 13,000 + speeds and is never under 4000-5000. At these speeds the oil degrades much more quickly.
The books use and maintenance of motion indicate that the oil must meet the specification Jasa MA. It is said that the oils to meet the car (since it is not mentioned in the label).
oils recommended for bikes usually have grade 15W40, 15W50, 20W50 or 10W40 and 5W50 ever (grading Mobil1).
The API SJ / SL, compared to SG / SH, require that the oil has a higher percentage of additives and friction modifiers lower percentage of other additives that are suitable for engines of motorcycles. For bikes, you should use oils SG / SH.
In summary
if you do an oil change per year and you do not want to risk, it is better to keep using oil for motorcycles. The cost is certainly higher, but at least you will sleep soundly.
If you want to stop paying the same oil twice the price you can travel 500/1000 km with oil and the car if the clutch does not slip and if the oil, once examined, it is clear and contains no imprità (metal particles result of friction components), then you can use.
0 comments:
Post a Comment